Filter
Top Products
MX410/MX412 System Manual Rear Panel
61189500L1-1B PRELIMINARY 4-3
REAR PANEL
The MX410/MX412 rear panel is equipped with wire-wrap pins for external auxiliary inputs,
wire-wrap pins for alarms (critical, major, and minor), a frame ground lug, and a single power
connector for both DC power feeds (A and B). Figure 4-2 illustrates the rear panel.
Figure 4-2. MX410/MX412 Rear View
WARNING
The Alarm interfaces and AUX inputs must not be metallically
connected to interfaces which connect to the Outside Plant or its
wiring. These interfaces are designed for use as intra-building
interfaces only. The addition of Primary Protectors is not sufficient
protection in order to connect these interfaces metallically to OSP
wiring.
Power Connection
Figure 4-3 illustrates the DC power pins and power connector. Refer to “Power Up” on page 4-
11 for more power information.
Figure 4-3. DC Power Connections
Power Connector