Filter
Top Products
MX410/MX412 System Manual Menu Descriptions
61189500L1-1B PRELIMINARY 5-33
Table 5-16. PPP BCP/IPCP Menu Options
Option Description Function
1 BCP/IPCP This option is used to select either BCP (Bridge Control Protocol) or
IPCP (IP Control Protocol for routing).
PPP (1-4)
2 IP Address This option invokes another menu which is used to enter the IP
Address, the Subnet Mask for the PPP. The IP Address is written in
the format XXX.XXX.XXX.XXX, where each 3-digit field has a value
between 1 and 255.
N/A Subnet Mask This field displays the PPP Subnet Mask. The Subnet Mask is writ-
ten in the format XXX.XXX.XXX.XXX, where each 3-digit field has
a value between 1 and 255.
N/A Far End IP Address This read-only field displays the far-end device IP address.
3 SNMP Link Status
Trap
This option invokes another menu which is used to either enable or
disable the SNMP link status trap.
N/A LCP Status This read-only field displays the Link Control Protocol (LCP) status
as Up or Down.
BCP/IPCP Status This read-only field displays the BCP/IPCP status as Up or Down.