Filter
Top Products
MX410/MX412 System Manual Menu Descriptions
61189500L1-1B PRELIMINARY 5-39
3 FXS (MX412 only) This option is used to provision the FXS port. Options are as
follows:
• Choose TO Group (for DS1 1 through DS1 4)
• Choose TO DS0 Range: enter a range
• Mode: Select Loop Start, PLAR D4, PLAR D3, or FX Ringdown.
Refer to Table 4-6 on page 4-9 for descriptions of these options.
• Apply Cross-Connect
System
3 System ID This option is used to assign a new system ID.
4 IP Address This option is used to enter the IP Address for the MX410/MX412.
The IP Address is written in the format XXX.XXX.XXX.XXX, where
each 3-digit field has a value between 1 and 255.
N/A Subnet Mask This option is used to enter the subnet mask, written in the format
XXX.XXX.XXX.XXX, where each 3-digit field has a value between 1
and 255.
5 Default Gateway This option is used to enter the default gateway. The Gateway
address is written in the format XXX.XXX.XXX.XXX, where each 3-
digit field has a value between 1 and 255.
6 Date This option is used to enter the date.
7 Time This option is used to enter the time.
8 Cross-Connect
Mapping
This is another path to the Cross-Connect Mapping Menu shown in
Figure 5-13 on page 5-23 and contains the same options.
Table 5-20. Quick Setup Menu Options (Continued)
Option Description Function