Filter
Top Products
Menu Tree MX410/MX412 System Manual
5-8 PRELIMINARY 61189500L1-1B
Figure 5-2. MX410/MX412 Menu Tree (Continued)
1. Trap Host IP
2. Trap Host Method
3. Trap Host Status
7. SNMP
8. System Configuration Archive (SCA)
9. Save Provisioning
10. Auto Save
1. SCA TFTP Server
2. Remote Filename
3. All/Data Path Only
4. Perform SCA Save
5. Perform SCA Restore
7. Auto Save
6. Auto Save Time
C
1. SNMP State
2. Trap Host 1 IP
3. Trap Host 2 IP
5. Trap Host 4 IP
4. Trap Host 3 IP
6. SNMP Traps
11. Write Community
8. System Location
7. System Name
10. Read Community
9. System Contact
1. IP Address
2. Subnet Mask
3. Apply Settings
New Gateway
New Network / Mask
New Default Router
New Lease Time (d:h:m)
New IP Address
New Subnet Mask
1. IP Address
2. Subnet Mask
3. Apply Settings
New IP Address
New Subnet Mask
6. Network Management
1. Enabled
2. Disabled
1. State
2. Network
3. Default Router
New DNS Router
4. DNS Router
New Range (begin-end)
5. Address Range
6. Lease Time
1. BCP
2. IPCP
1. Enabled
2. Disabled
1. Enabled
2. Disabled
1. All
Bold text indicates default
2. Data Path Only
1. Enabled
2. Disabled
1. Enabled
2. Disabled
Eth (1 - 4)
PPP (1 - 4)
1. Auto
2. 10 Mbps, Half Duplex
3. 10 Mbps, Full Duplex
4. 100 Mbps, Half Duplex
5. 100 Mbps, Full Duplex
1. BCP/IPCP
2. IP Address
Subnet Mask
Far End IP Address
LCP Status
BCP/IPCP Status
3. SNMP Link Status Trap
1. IP Address
Subnet Mask
2. Gateway
MAC Address
3. Link Speed & Duplex
Functional Link Speed & Duplex
Link Status
New System ID
New Location
New Contact
New Community
New Community
Enter SCA TFTP Server
Enter Remote SCA Filename
Enter Auto Save Time (Day HH:MM)
1. Ethernet
2. PPP BCP/IPCP
3. DHCP