Filter
Top Products
Getting Started 1
U2761A User’s Guide 15
E. Connect the Module to Your PC
1 After the installations have completed, connect the power
cord to the AC/DC power adapter. The AC/DC power
adapter requirements are 100 to 240 VAC, 50/60 Hz, with
an output voltage of +12 VDC.
2 Insert the DC output plug from the AC/DC power adapter
to the power jack on the rear panel of the U2761A.
3 Connect the U2761A to any USB port on your PC with
the bundled USB cable.
4 Your PC will automatically detect the connected unit and
the Found New Hardware Wizard window will appear. Select
Yes, this time only and click Next to proceed.
NOTE
Ensure that the Agilent Measurement Manager is installed before
proceeding.