Filter
Top Products
56 U2761A User’s Guide
2 Features and Functions
Soft Front Panel Operation
Click Mod and then select FM as shown in
Figure 2- 18. To output the FM waveform, configure the
settings for the carrier frequency, output amplitude, offset
voltage, modulating frequency, deviation, and the desired
waveform.
Figure 2-18 Panel view of FM
Remote Interface Operation
FM:STATe {0|OFF|1|ON}
Carrier Waveform
The FM carrier waveform consists of Sine, Square, Ramp,
Triangle, or Arbitrary waveform. The default waveform is
Sine wave. You cannot use Pulse or DC as the carrier
waveform.
Soft Front Panel Operation
For Arbitrary waveforms, select Arb at the top panel
as shown in Figure 2-2 and select the desired waveform
from the drop down list as shown in
Figure 2- 16.