Filter
Top Products
Features and Functions 2
U2761A User’s Guide 51
Figure 2-16 Panel view of the Arbitrary waveform
Remote Interface Operation
FUNCtion {SINusoid|SQUare|RAMP|USER}
You can also use the APPLy command to select the function,
frequency, amplitude, and offset.
Carrier Frequency
The maximum carrier frequency depends on the selected
function as shown below. The default frequency is 1 kHz for
all functions.
Table 2-3 Carrier frequency for AM
Function Minimum frequency Maximum frequency
Sine 1 μHz 20 MHz
Square 1 μHz 20 MHz
Ramp, Triangle 1 μHz 200 kHz
Arbitrary 1 μHz 200 kHz