Filter
Top Products
72 U2761A User’s Guide
2 Features and Functions
Soft Front Panel Operation
Click Mod and then select PSK as shown in
Figure 2- 24. To output the PSK waveform, configure the
settings for the carrier frequency, output amplitude, offset
voltage, deviation, and PSK rate.
Figure 2-24 Panel view of PSK
Remote Interface Operation
PSKey:STATe {0|OFF|1|ON}
Carrier Waveform
The PSK carrier waveform consists of Sine, Square, Ramp,
Triangle, or Arbitrary waveform. The default waveform is
Sine wave. You cannot use Pulse or DC as the carrier
waveform.
Soft Front Panel Operation
For Arbitrary waveforms, select Arb at the top panel
as shown in Figure 2-2 and select the desired waveform
from the drop down list as shown in
Figure 2- 16.