Filter
Top Products
Features and Functions 2
U2761A User’s Guide 63
Remote Interface Operation
FUNCtion {SINusoid|SQUare|RAMP|USER}
You can also use the APPLy command to select the function,
frequency, amplitude, and offset.
Carrier Frequency
The maximum carrier frequency depends on the function
selected as shown below. The default carrier frequency is
1 kHz for all functions.
Soft Front Panel Operation
On the Frequency panel as shown in Figure 2-3, input the
desired frequency value and select the unit from the drop
down list.
Remote Interface Operation
FREQuency <frequency>
You can also use the APPLy command to select the function,
frequency, amplitude, and offset.
Table 2-5 Carrier frequency for PM
Function Minimum frequency Maximum frequency
Sine 1 μHz 20 MHz
Square 1 μHz 20 MHz
Ramp, Triangle 1 μHz 200 kHz
Arbitrary 1 μHz 200 kHz