Filter
Top Products
Features and Functions 2
U2761A User’s Guide 29
To select a function, click any of the functions on the top
panel as shown below. When a function is selected, the
button will be illuminated.
Figure 2-2 Top panel view of the U2761A
Click Arb to output the Arbitrary waveform. Select
other Arbitrary waveform choices from the drop down list
.
Remote Interface Operation
FUNCtion {SINusoid|SQUare|RAMP|PULSe|DC|USER}
You can also use the APPLy command to select the function,
frequency, amplitude, and offset.
Output Frequency
As shown below, the output frequency range depends on the
function currently selected. The default frequency is 1 kHz for
all functions.
Table 2-2 Output frequency range
Function Minimum frequency Maximum frequency
Sine 1 μHz 20 MHz
Square 1 μHz 20 MHz
Ramp, Triangle 1 μHz 200 kHz
Pulse 500 μHz 5 MHz
DC Not applicable Not applicable
Arbitrary 1 μHz 200 kHz