Filter
Top Products
50 U2761A User’s Guide
2 Features and Functions
Soft Front Panel Operation
Click Mod and then select AM as shown in
Figure 2- 15. To output the AM waveform, configure the
settings for the carrier frequency, modulating frequency,
depth, output amplitude, offset voltage, and the desired
waveform.
Figure 2-15 Panel view of AM
Remote Interface Operation
AM:STATe {0|OFF|1|ON}
Carrier Waveform
The AM carrier waveform consists of Sine, Square, Ramp,
Triangle, or Arbitrary waveform. The default waveform is
Sine wave. You cannot use Pulse or DC as the carrier
waveform.
Soft Front Panel Operation
For Arbitrary waveform, select Arb at the top panel
as shown in Figure 2-2 and then select the desired
waveform from the drop down list as shown in
Figure 2- 16.