Filter
Top Products
Chapter 4: Installing the Gateway Outdoors
52 Section I: Outdoor Installation
Reviewing Safety Precautions
Please review the following safety precautions before you begin to install
the gateway.
Note
The indicates that a translation of the safety statement is
available in a PDF document titled “Translated Safety Statements”
on the Allied Telesis website at www.alliedtelesis.com.
Warning: Class 1 Laser product.
L1
Warning: To prevent electric shock, do not remove the cover.
No user-serviceable parts inside. This unit contains hazardous
voltages and should only be opened by a trained and qualified
technician. To avoid the possibility of electric shock, disconnect
electric power to the product before connecting or disconnecting
the LAN cables.
E1
Warning: Do not work on equipment or cables during periods of
lightning activity.
E2
Warning: Class I Equipment. This equipment must be earthed.
The power plug must be connected to a properly wired earth
ground socket outlet. An improperly wired socket outlet could
place hazardous voltages on accessible metal parts.
E4
Pluggable Equipment. The socket outlet shall be installed near
the equipment and shall be easily accessible.
E5
Warning: Operating Temperature. This product is designed for a
an operating temperature range of -40 to +60 degrees C.
All Countries: Install product in accordance with local and
National Electrical Codes.
E8
Warning: Only trained and qualified personnel are allowed to
install or to replace this equipment.
E14