Filter
Top Products
49
Figure 82: DATA CAPTURE Sub-Menu
Press “Set” to return to the previous menu.
CAPTURE TO PORT 1
This feature redirect the incoming data to VSI-Pro Max to its output ( Pin 3 of AT type RS-232 female connector )
where that data can be stored to data storing devices (e.g. PC). This feature is useful to store non-RS 232 format
data. Press the “Up” or “Down” button to move the cursor to “CAPTURE TO PORT 1 and press “Set”. The following
display will appear (example only):
CAPTURE TO PORT 1
CAPTURE TO MEMORY
DUMP MEMORY
EXIT
DATA CAPTURE
This feature allow user to store the data either internal memory of VSI-Pro Max or some external data storing device.
Press the “Up” or “Down” button to move the cursor to “DATA CAPTURE” and press “Set”. The following sub-menu
will appear:
Press “Set” to return to the previous menu.
CAPTURE TO MEMORY
This feature allow you to store the data in the internal memory of VSI-Pro Max. You can store up to 20 kilobytes of
data in the internal memory of VSI-Pro. Power up the VSI-Pro for 24 hours prior to download of data. This will provide
VSI-Pro’s internal battery a full charge to hold data in its memory. Press the “Up” or “Down” button to move the cursor
to “CAPTURE TO MEMORY” and press “Set”. The following display will appear (example only):
Figure 83: CAPTURE TO PORT 1 Display
Figure 84: CAPTURE TO MEMORY Display
RX BAUDRATE : AUTO
TX BAUDRATE : 2400
PARITY : NONE
DATA BIT : 8
HANDSHAKING : OFF
BAUDRATE DETECTION..
RX BAUDRATE : AUTO
TX BAUDRATE : 2400
PARITY : NONE
DATA BIT : 8
HANDSHAKING : OFF
BAUDRATE DETECTION..
Press “Set” to return to the previous menu.
NOTE ?
VSI-Pro can hold up to 120 kilobytes of data to make sure that you only transfer the
data which is in correct format.
PROGRAMMING
VSI-Pro Max POS / Cash Register Interface