Filter
Top Products
83
All of the foregoing constitute Buyer’s sole and exclusive remedy and Seller’s sole and exclusive liability for supply-
ing nonconforming or defective Product.
RETURNS
AVE products are fully inspected and carefully packed to ensure you are delivered a quality product in good condi-
tion. If you are not fully satisfied with our product, returns of standard stocking items with no restocking fee can be
made within thirty (30) days of invoice to Buyer. All such returns must have prior consent of Seller by obtaining an
RMA number and must include the sales or delivery receipt showing the date of original purchase and be in an
unused condition contained in its original packaging. Any other returns must have prior written consent of Seller and
are subject to a restocking fee of fifteen percent (15%) and freight charges.
RMA NUMBER
The RMA (Return Material Authorization) number must be obtained by contacting Seller prior to the shipment of the
product for return. The RMA number is valid only for 15 days from the date of issue. The RMA number must be clearly
displayed on all shipping labels.
SELLER SHALL NOT BE LIABLE FOR ANY SPECIAL, DIRECT INCIDENTAL OR CONSEQUENTIAL
DAMAGES OF A COMMERCIAL NATURE ARISING OUT THE USE OF OR INABILITY TO USE
SELLER’S PRODUCT BY REASON OF THE FACT THAT SUCH PRODUCT DOES NOT CONFORM
TO THE CONTRACT OR TO ANY EXPRESS OR IMPLIED WARRANTY. SELLER’S MAXIMUM LI-
ABILITY SHALL BE LIMITED TO THE COST OF REPAIR AND/OR REPLACEMENT OF THE PROD-
UCT CLAIMED TO BE DEFECTIVE OR NONCONFORMING, SUBJECT TO SELLER’S RIGHT OF
REMOVAL AND RETURN OF PRODUCT.
APPENDIX P LIMITED WARRANTY
VSI-Pro Max POS / Cash Register Interface
If you have difficulty entering the main-menu or you changed uP or updated the Firmware in your VSI-Pro Max, do
the following procedure exactly: Lightly press and hold in the 3 buttons to the left (“Up”, “Down” & “Set”). While
holding down these buttons, press and release the “Reset” button. Then release the other buttons. Wait a few
seconds and the copyright notice will appear on-screen along with the version of software installed in your VSI-Pro
Max.
Upon powering up the VSI-Pro Max for the first time, if the battery is depleted the master reset should be done.
However in some cases the Time/Date display may not have the correct or legible characters. If this occurs, go to the
Clock programming section of the menu and reset the clock and program the correct time. The Time/Date display will
then function properly and any subsequent master resets will not affect the time.
The internal rechargeable NiMH battery needs a full 24 Hr charge if fully discharged to be fully charged.
WARNING!
DOING A MASTER RESET CLEARS ALL PROGRAMMING AND
THE VSI-Pro Max DEFAULTS TO THE FACTORY SETTINGS.
MASTER RESET APPENDIX Q