Filter
Top Products
Setup Pages
62
MVP Modero ViewPoint Touch Panels
Protected Setup Navigation Buttons
The Protected Setup Navigation Buttons (FIG. 52) appear on the left of the panel screen when the
Protected Setup page is currently active.
Protected Setup Page (Cont.)
System Recovery (Cont.): • Remove User Pages - allows you remove all TPD4 touch panel pages
currently on the panel, including the pre-installed AMX Demo pages. This
option invokes a Confirmation dialog, prompting you to confirm your selection
before removing the panel pages.
Note that the YES button on the Confirmation dialog is disabled for 5 seconds
as additional protection against accidentally resetting the panel or removing
the panel pages.
Reboot Panel: Pressing this button causes the panel to reboot after saving any changes.
Docking Station: • Dock Status - illuminates when the MVP is docked and communicating with
the Docking Station.
• Undock Panel - forces the docking station to release the MVP without
requiring a User Access username or password.
• Disable Docking Station LED - disables the display of the LEDs on the
docking station.
FIG. 51
Function Show example
FIG. 52 Protected Setup Navigation Buttons
Channel Code
3,132
2,8 3,50
Channel Port
Level Port
Address Port
Address Code
Channel Code
BUTTON
Press to access the G4 Web Control page where you can enable or disable remote
Press to access the Passwords Setup page where you can specify firmware
Press to access the Calibration page where you can calibrate the panel-
Press to access the Wireless Settings page where you can configure wireless
Press to access the System Settings page where you can configure
Closes the Protected Setup page
display and control of the panel via a web-enabled PC running a VNC client.
and user access passwords
.
.
connection settings.
communication settings for the NetLinx Master and the panel