Filter
Top Products
8 Shut down your computer.
9 Start up your computer from the first system software installer disk that you made with
the Floppy Disk Maker application.
The Installer’s Welcome screen appears. You may have to double-click the
System Software Installer icon to open the Installer program.
10 Click OK.
The Easy Install dialog box appears. (The dialog box that appears on your
screen may look slightly different than this one.)
11 Make sure that the hard disk named in the Destination Disk box is the one on which you
want to install system software.
If it isn’t, click Switch Disk until the correct disk name appears.
12 Hold down Shift–
x
–K to start the clean installation.
The following dialog box appears.
115
Diagnostic Techniques
Disk on which
system software
will be installed
For a clean installation,
DO NOT click the
Install button.
If you need to install on a
different disk, click this button.