Filter
Top Products
4 Hold the module by the gripping surface and pull it out of the computer.
IMPORTANT
You should not remove an expansion bay module if it is in use or
you may lost data. If you try to remove the module when it is in use, you’ll
see a message telling you to reinsert it. Reinsert the module, quit any files
or programs that may be using the floppy disk (or other medium inserted in
the module), then drag the disk’s icon to the Trash or choose Put Away from
the File menu.
If you put your computer to sleep while a floppy disk or other medium is
inserted, the green in-use light will flash (similar to the sleep indicator light
on your computer’s display). You cannot remove the module while the in-use
light is flashing.
Hold the module by the gripping surface
and pull it completely out of the computer.
The module release latch automatically slides back
into its proper position as you remove the module.
Gripping surface
39
Using Expansion Bay Modules and PC Cards