Filter
Top Products
61
• Rate Button – Displays the rate of the packets or bytes per port.
• Since Rst Button– Displays the packets/bytes switched since the management counters were last
reset or cleared.
• Reset Button– Clears the counters for future samplings.
• Counters – Displays the statistical counters of the associated view, since up or since reset.
Note: You may also view a summary of the frames per port by placing the cursor on the desired
bar. A box with the statistics appears.
To see either a line graph or a table display of the system’s statistics, click on a bar, then choose the option
you want from the pop-up menu at the top of the Statistics page, and click
Apply
.
5.4 Port Config (Port Configuration) Button
This button opens the Port Configuration page, which provides a comprehensive overview of the status of
each port on the IntraCore, as shown below.
To configure individual ports, click on the associated blue number in the right or left hand margin to access
that port’s configuration page.