Filter
Top Products
64
The top table displays the counts of IP and MAC addresses for each port. The lower table displays IP and
MAC addresses for either a particular port, or all ports. The activity status (Entry) and VLAN segment
(VSEG) are also displayed for each device.
To see the MAC and IP addresses, the activity status, and the VLAN segment for the devices connected to
a particular port, click the port’s number in the top table. Use the
Search
boxes to search for either an IP or
MAC address on the IntraCore.
5.8 VLAN Button
This button opens the VLAN Port Attributes page, as shown below.
The page shows the units of the switch, and the ports that are assigned to the currently selected VLAN. For
information about VLANs, see Chapter 4 and Chapter 6. Click on
VLAN Configuration
at the top of the