Filter
Top Products
Using Your Projector
2-5
For most settings, you make incremental adjustments by moving a slide bar.
To move a slide bar, press the edges of the MouseDisk, press the up and
down arrow keys on the projector’s control panel, or use the optional
Cyclops wand or laser pointer.
Changing the language on the menus
To change the menus to a different language, choose Language on the
Preferences menu. Then choose the language you prefer. You can select
between English, Spanish, French, German, and Italian. The menus instantly
change to the language you selected.
Saving your settings
Your current settings are saved when you exit the menus. Your settings will
also be saved if you hold the key for two seconds (to turn off the lamp).
If two or more presenters want to save their settings separately, see Advanced
Features.
Reverting to the factory defaults
If you want to revert to the original factory settings for a specific computer
source, choose Image, Factory Defaults, Reset.
To reset the projector itself, press the Clear key, then press each of the four
arrow keys on the projector’s control panel once. The power LED indicator
will blink twice to indicate the projector has been reset.
ADJUSTING THE IMAGE
Press the Setup key to access most of the settings you need to adjust the
image.
Note: The choices on the Setup menu vary, depending on your current input
source.
Adjusting the brightness
To adjust the brightness, press the Setup key until the Brightness slider
appears. Press the edges of the MouseDisk, use the optional Cyclops wand
or laser pointer, or press the left and right arrow keys to move the slider.
You can also adjust the brightness by accessing the projector menus and
choosing Bright from the Image menu.