Filter
Top Products
Using Your Projector
2-7
Switching to rear projection mode
To switch to rear projection mode (projecting from behind the projection
screen instead of in front of the screen), choose Projection, Rear from the
Projector menu.
ADJUSTING THE AUDIO
You can adjust the volume from the Cyclops remote control, the control
panel, or the menus. The Audio menu contains additional audio controls.
Displaying and hiding the volume indicator
You can display a volume indicator while you increase or decrease the
volume of the internal speakers. To display the volume indicator, choose
Preferences, Onscreen, Display. To suppress this visual indicator, set
Onscreen to Hide.
Adjusting the volume
To adjust the volume of the internal speakers and any external speakers
you’ve connected, press the plus (+) or minus (–) Volume key on the remote
or control panel. You can also make your adjustments through the Audio
menu.
Muting the audio
To mute the audio, press the Mute key on the remote, or choose Mute from
the Audio menu.
To turn the sound back on, press the Mute key a second time or choose
Mute, Normal from the Audio menu.
Adjusting bass and treble
To adjust the level of bass or treble, choose the corresponding command on
the Audio menu, then move the slide bar in the appropriate direction.