Filter
Top Products
8. Configurator, Projector adjustment settings
Adjust the red and blue by moving the slider up or down or by clicking on the up down control until there
isnoredorbluenoisevisibleintheblackareas.
Image 8-20
Input balance adjustment
White balance adjustment
Putgainredandgainblueon-32.
Adjust the contrast to a maximum value until the green noise becomes visible in the white areas and return
one click.
Adjust red gain until red noise beco
mes visible in the white areas and return one click. Repeat for blue
gain until blue noise becomes visible in the white areas and return also one click.
8.4 Image settings
Overview
The following image settings can be adjusted depending on the source type:
• Contrast
• Brightness
• Saturation
•Phase
R59770183 PROJECTOR TOOLSET 15/07/2009
105