Filter
Top Products
5. Configurator
Or,
press Ctrl + N.
The New configuration dialog box opens (b).
Fill out a name for the new configuration next to Configuration name. The default name will be Configu-
ration_’digit’ (c).
Note: Only the characters a to z, A to Z, 1 to 9 and (, ), _, -, @ or allowed in a name.
When it is the first configuration for this workspace, only the option Create by adding projec tors is avail-
able.
When there are already configuration available, the option Basedonavailableconfiguration becomes
available
Check the radio button of your choice (d).
When Base d on available configuration is checked, click on the combo box and select the configuration
on which the new configuration must be based on (e).
Click OK to create the new configuration (f).
Image 5-2
Create new configuration
5.4 Add projector to a configuration
• Add projector
• General properties
• Connection setup
• Decorator setup
5.4.1 Add projector
The possible projectors types depends on the installed plug-ins.
44 R59770183 PROJECTOR TOOLSET 15/07/2009