Filter
Top Products
7. Configurator, Projector alignment settings
Adjusting via the up down controls
Click on the up down control of the spin box of the gamma adjustment until the desired value is reached.
The value in the input field change accordingly.
Adjusting via the input field
Click inside the input field of the spin box of the gamma adjustment.
Select the actual value and enter a new value with the keyboard.
7.4 Horizontal keystone correction
What can be done ?
The side keystone (horizontal keystone) correction is used to align the image if the projector is mounted
at a non standard projection angle.
Image 7-6
Side keystone
A Keystone adjustment with positive values
B Keystone adjustment with negative values
How to adjust
Click on the slider, hold down the mouse button and dr
ag the slider to the left (bottom correction) or the
right (top correction) until the desired keystone correction is obtained
Or,
click in the input fieldnexttothesliderandenterthedesiredvaluewiththekeyboard.
Value can change between - 255 and + 255. A negative value is a correction at the bottom side of the
image. A positive value is a correction at the top side of the image. (image 7-7)
Image 7-7
Keystone correction
78 R59770183 PROJECTOR TOOLSET 15/07/2009