Filter
Top Products
8. Configurator, Projector adjustment settings
When a standard file is selected or a not exactly matching custom file, Projector Toolset will ask to
create a new custom file by copying the settings of the selected file into the custom file.
Click OK to continue.
The new created custom source file is loaded and can be edited if necessary
Image 8-4
Load fitting file
Load via the input window
Select first a window.
Click on Adjust (a). (image 8-5)
The Input dialog box is displayed (b).
Click File and select Load ( FIT) (c).
Alistoffitting files is displayed in Load (fit) dialog box (d).
Select a file from the list (e).
Click Open or Select to load the selected file (f).
Whenastandardfile is selected or a not exactly matching custom source file, Projector Toolset will ask
to create a new custom file by copying the settings of the selected file into the custom file.
Click OK to create a new custom source file. If Cancel is pressed the previous selected file is loaded
again.
The new created filecanbeedited.
92
R59770183 PROJECTOR TOOLSET 15/07/2009