Filter
Top Products
5. Configurator
About adding a projector
To mak e it more ea sy to find back a projector while adding it to the software, the different projectors are
grouped in categories.
The following categories are available for the moment (depending on the loaded plug-ins):
• Digital cinema: this category contains all supported digital cinema projectors and touch panels.
• Mid venue: this category contains all supported projectors from the CLM and SLM series.
• Large venue: this category contains all supported projectors from the FLM series.
• XLarge venue: this category contains all supported projectors from the XLM series.
How to add
Click Configuration on the menu and select Add (a). (image 5-3)
Move the cursor to the right and select the desired category.
Move the cursor again to right and select the desired projector.
The Create projector dialog box opens with the selected device type pictograph at the right side (b).
Enter the different device properties such as the projector identification, the connection parameters and
projector decorator for the configuration preview.
Image 5-3
Add projector
When adding twice the same projector, once via a network connection and once via a
serial connection, a message will be displayed to warn the user that there is already an
instance with the same projector and that problems with the communication are pos-
sible. The projector will be added but Projector Toolset advises to uninstall one of the
connections.
R59770183 PROJECTOR TOOLSET 15/07/2009 45