Filter
Top Products
5. Configurator
Click in the input field and enter the host name (d).
Click OK to make the connection.
Image 5-8
Create connection via host name
Making a connection via a host name is only possible when the host name is known by
the network DNS server.
Via a projector scan single connection
Select the Connection properties tab (a). (image 5-9)
The right pane changes to the connection setup page.
ClickontheradiobuttonnexttoA projector connected on the network to select the Ethernet connection
(b).
Click on the Device scan button (c).
The Scanning proje ctor progress bar appears. The broadcast query (based on UDP) for projectors
scans the complete LAN network to detect available projectors on the network. The scanning results
are displayed in the Discover projectors dialog box (d). Only the projector of the added projector type
and the not yet added projectors to the configuration are in the list.
Click on the desired IP address to select (e) and click Open (f).
A connection is made with the selected projector.
R59770183 PROJECTOR TOOLSET 15/07/2009
51