Filter
Top Products
14. Installation
14.6 RS232 baudrate
How to change the baudrate?
1. Press MENU to activate the Toolbar
2. Press → to select the Insta llation item
3. Press ↓ to Pull down the Ins tallation menu
4. Use ↑ or ↓ to select R S2 3 2 b audrate (image 14-9)
5. Press → to pull down the menu
6. Use ↓ or ↑ to select the desired baudrate
7. Press ENTER
Image 14-9
14.7 Security
What can be done ?
A security function is implemented in the projector and
allows a protection against theft.
A PIN code allows the user to lock the projector in case of wrong code entry.
The PIN code must be entered at each start up(Power ON), entering three times a wrong number triggers await cycleof 15 minutes,
the second 3 wrong codes a wait cycle of 30 minutes, 1 hour, ...
The security mode can be enabled or disabled.
How to activate the security mode ?
1. Press MENU to activate the Toolbar
2. Press → to select the Insta llation item
3. Press ↓ to Pull down the menu
4. Use ↑ or ↓ to select Security (image 14-10)
5. Press → to open the menu
6. Use ↑ or ↓ to select ON
7. Press ENTER
A dialogbox is displayed (image 14-11)
116
R5976741 MGP 15 MEDICAL GRADE PROJECTOR 28/04/2004