Filter
Top Products
14. Installation
Image 14-18
14.10Automatic startup
What can be done ?
The automatic startup allows immediate restart of the projector after a power failure (breakdown), i.e. without passing through the
standby state.
The projector restarts at power resume and recovers the previous settings (previous source,...).
This function can be disabled if undesired or inadequate for safety reasons, etc.
CAUTION: If the Automatic startup function is enabled one must be aware of the fact that it involves safety
precautions
Make sure that the projector (or the operators!) will not be affected by altered environmental conditions when
restarting at power resume.
How to enable/disable the Automatic startup?
1. Press MENU to activate the Toolbar
2. Press → to select the Insta llation item
3. Press ↓ to Pull down the Ins tallation menu
4. Use ↑ or ↓ to select Automa tic startup
5. Press → to pull down the menu
6. Use ↓ or ↑ to enable/disable the automatic startup (image 14-19)
7. Press ENTER
120
R5976741 MGP 15 MEDICAL GRADE PROJECTOR 28/04/2004