Filter
Top Products
8. Adjustments
Image 8-14
8.11 Standby Timer
Purpose of the Standby Timer
If there is no signal, and the standby timer is enabled, a dialogbox is displayed and the projector will shut down after a determined
time.
Image 8-15
The countdown time can be set in a dialog box in a range from 180 to 3600 seconds (default value = 300). The Timer can also be
disabled.
How to enable the timer ?
1. Press MENU to activate the Toolbar
2. Press → to select Adjustment
3. Press ↓ to Pull down the menu
4. Use ↑ or ↓ to select Standby Timer (image 8-16)
5. Press ENTER to activate the function
On the screen appears a dialogbox (image 8-17)
6. Use ↑ or ↓ to select Enabled, a box surrounds the selected item, press ENTER to activate
7. Use ↑ or ↓ to browse to the input field
8. Use ←or→ , the numeric keys on the remote o
r the keypad to change the countdown setting
9. Press MENU or BACK to exit or to go back to the previous menu
R5976741 MGP 15 MEDICAL GRADE PROJECTOR 28/04/2004
57