Filter
Top Products
11. Tools
11. TOOLS
Overview
• Source switching mode
• Picture in Picture
• PiP select
• Add window
• Remove window
• PiP Lay-out
•PiPAdjust
• Background
• Logo
11.1 Source switching mode
Switching from one source to another
To minimize undesired effectswhen switching from one source toanother, one can use theSeamlessswitching mode, beside Seam-
less switching there is a wide choice of several effects which render the source switching transitions more enjoyable.
How to select a switching mode ?
1. Press MENU to activate the Toolbar
2. Press → to select the Tools item
3. Press ↓ to Pull down the menu
4. Use ↑ or ↓ to select Source switching mode
5. Press → to open the Source switching mode menu (image 11-1)
6. Press ENTER
The logo is displayed
Image 11-1
The Random mode will select a new switching mode at each source switching i.e. there will never be 2 suc-
cessive source switchings with the same effect.
The Seamless switching mode is not used in the Random mode.
Note on Fade in/out
In some cases, depending on the sources to be switched, the fade in/out effect is impossible or may not occur.
R5976741 MGP 15 MEDICAL GRADE PROJECTOR 28/04/2004 85