Filter
Top Products
10. Settings
Image 10-4
The custom display function allows the selection of a user defined display function set in Factory, which is a
linear function (Gamma = 1)
10.2.2 Display function in a closed loop medical visualization system
Display function in a closed loop medical visualization system
If, however the projector is part of a typical closed loop medical visualization system (Barco Dicom
®
Theatre ), the Display function
will be set by the control & calibration system (MediCal
®
Pro) along with a color temperature forming a pre-set value.
How to select a Display function ?
1. Refer to the system manual
OSD interaction
When a preset is selected on MediCal
®
Pro , the selected Display function (as well as the color temperature ) will be marked on the
projector’s OSD menu.
Standard
DICOM
DIN
Custom
Image 10-5
Display function : active selection
The completionof the calibration procedurewill in the sameway be signaled bya separate logo (aswell as forthe color temperature).
Standard
DICOM
DIN
Custom
Image 10-6
Display function: calibr
ated
70 R5976741 MGP 15 MEDICAL GRADE PROJECTOR 28/04/2004