Barco R9003110 Projector User Manual


 
8. Adjustments
•4:3
16:9
•5:4
•Auto
The Auto function calculates an aspect ratio based on the information stored in the image files.
Selecting Auto in case of a Video source may shrink the image horizontally
How to change the Aspect ratio ?
1. Press MENU to activate the Toolbar
2. Press to select Adjustment
3. Press to Pull down the menu (image 8-8)
4. Use or to select Aspect ratio
5. Press ENTER to confirm
Image 8-8
The Aspect ratio menu is greyed out in case of a None or Full screen scaling, see "Scaling", page 50
8.8 Positioning
What can be done ?
The pixel start and line start calculated by Autosetup (values can be read in the image file) can be adapted.
This adaptation can be seen as a horizontal (pixel start) and vertical image shift (line start).
How to reposition the image ?
1. Press MENU to activate the Toolbar
2. Press to select the Adjustments item
3. Press to Pull down the menu
4. Use or to select Positioning
52
R5976741 MGP 15 MEDICAL GRADE PROJECTOR 28/04/2004