Filter
Top Products
5. Getting started
For key overview: "Terminology overview", page 31
Image 5-6
Local keypad layout
Remote control functions.
This remote control includes a battery powered infrared (IR) transmitter that allows the user to control the projector remotely. This
remote control is used for source selection, control, adaptation and set up. It includes automatic storing of picture controls (Bright-
ness, Sharpness...) and setti
ngs.
Other functions of the remote control are :
• switching between stand by and op
erational mode.
• switching to "pause" (blanked picture, full power for immediate restarting)
• direct access to all connected sources.
Diagnose LED’s
Green
Red
LED1
cool down sequence: flickers 60 seconds (120
seconds in case of 400 series) after switching to
standby
rescue program (software error)
LED2
only for iQ Pro: shows when projector is in
standby and server is actif.
hardware error
LED3 IR acknowledgement continue : standby
flickers : Security = ON
30 R5976741 MGP 15 MEDICAL GRADE PROJECTOR 28/04/2004