Filter
Top Products
10
OmniView IP 5000 HQ
SECTIONS
Table of Contents
1 3 5 7 9 11 13 15 17 192 4 6 8 10 12
14
16
18
20 21
SETTING UP THE SYSTEM
7
Set up the Belkin KVM-over-IP systems according to their user manuals’
instructions. In order to be managed by OmniView IP 5000HQ, all
Belkin KVM-over-IP devices must be configured to be OmniView IP
HQ-enabled. This is done from the “Network Configuration” page of
each KVM-over-IP device.
Also in the OmniView IP HQ section in Figure 10, specify how the
OmniView IP 5000HQ server detects the IP device. This can be done
either by:
Manager Auto Discovery – When checked, OmniView IP 5000HQ
automatically detects the IP device if it resides on the same
network segment.
Manager IP – If the IP device resides on a different segment, type the
static IP address of the OmniView IP 5000HQ Manager. (We advise
typing the static IP address of the OmniView IP 5000HQ Manager even if
the IP device resides on the same network segment as the OmniView IP
5000HQ Manager.)
Install third-party Access Services according to their own installation
and configuration instructions. See the “Configuring Access Services”
section on page 55 for details required for the integration of the Access
Services into the OmniView IP 5000HQ system.
Figure 10 Enabling HQ for OmniView IP 5XXXG series