Belkin 5000HQ Server User Manual


  Open as PDF
of 109
 
70
OmniView IP 5000 HQ
CONFIGURING ACCESS SERVICES FOR INDIVIDUAL TARGETS
SECTIONS
Table of Contents
1 3 5 7 9 11 13 15 17 192 4 6 8 10 12
14
16
18
20 21
Description – Description of the Access Service: ILO
URL/Host – Type the URL/Host of the ILO resource.
Port/Application/PuTTy Application Path – These fields are only
relevant in SSH mode. The difference between SSH and Web mode is
detailed below.
SSH mode (default)
SSH mode uses an ILO console server. In SSH mode, the PuTTy
application must be installed on all client computers, preferably in the
samepath.Inthedefaultpath%ProgramFiles%\PuTTy,theapplication
couldbeinanydriveintheProgramFiles\PuTTyfolder.
The PuTTy application can be obtained from:
http://www.chiark.greenend.org.uk/~sgtatham/putty/download.html
In SSH mode, the port number is 22 (default).
See below for login method.
Web mode
Web mode uses a remote console with power management options.
In Web mode there is no need for an executable application. Figure 84
illustrates the ILO fields in Web mode.
Login Method:
• PromptforCredentials–ThismeanstheILOloginappearsandyou
log in manually.
• UseOmniViewIPHQCredentials–ThismeansOmniViewIP5000HQ
logs in to ILO with the currently logged user credentials. Ensure that
ILO is configured to recognize the same user name and password.
• UsetheFollowingCredentials–Wheretheusernameandpassword
are different for OmniView IP 5000HQ and ILO, select this option.
User name and password fields appear. Type the ILO user name
and password. OmniView IP 5000HQ logs in to ILO using this
user name and password.
Figure 84 ILO – Web mode
 previous next