Belkin 5000HQ Server User Manual


  Open as PDF
of 109
 
56
OmniView IP 5000 HQ
CONFIGURING ACCESS SERVICES – INTRODUCTION
SECTIONS
Table of Contents
1 3 5 7 9 11 13 15 17 192 4 6 8 10 12
14
16
18
20 21
11.1.2 Belkin Serial Console Server
Click “Single Port Console Server”. The Single Port Console Server
settings appear; see Figure 68.
Figure 68 Single Port Console Server settings
Description – Description of the Access Service: Single Port
Console Server
URL/Host – IP address of Console Server
Port – For Belkin Serial Console Server, TCP port number is 4000.
Application – PuTTy.exe is application used and it must be installed on
all client computers; see the paragraph below.
The PuTTy application can be obtained from:
http://www.chiark.greenend.org.uk/~sgtatham/putty/download.html
Path – PuTTy application must be installed on all client computers,
preferablyinthesamepath.Inthedefaultpath%ProgramFiles%\PuTTy
(see Figure 68), the application could be in any drive in the Program
Files\PuTTyfolder.Seethegeneralnotesaboveaboutvariables.
 previous next