Belkin 5000HQ Server User Manual


  Open as PDF
of 109
 
63
OmniView IP 5000 HQ
CONFIGURING ACCESS SERVICES – INTRODUCTION
SECTIONS
Table of Contents
1 3 5 7 9 11 13 15 17 192 4 6 8 10 12
14
16
18
20 21
11.1.8 Telnet
Click “Telnet”. The following are the default settings for telnet.
Figure 77 Telnet
Description – Description of the Access Service: Telnet
Application – PuTTy.exe is the application used for telnet access. The
PuTTy application can be obtained from:
http://www.chiark.greenend.org.uk/~sgtatham/putty/download.html
PuTTy Application Path – PuTTy application must be installed on
all client computers, preferably in the same path. In the default path
%ProgramFiles%\PuTTy(seeFigure77),theapplicationcouldbeinany
driveintheProgramFiles\PuTTyfolder.Seethegeneralnotesabove
about variables.
URL/Host – Type the URL/host of the telnet resource.
Port – The telnet port number is 23 (default).
 previous next