Filter
Top Products
88
OmniView IP 5000 HQ
MAINTENANCE OF THE SYSTEM
SECTIONS
Table of Contents
1 3 5 7 9 11 13 15 17 192 4 6 8 10 12
14
16
18
20 21
16.3 Firmware upgrade
Periodically Belkin releases firmware upgrades for its KVM-over-IP
devices and the OmniView IP 5000HQ Manager. These upgrades can be
found at www.belkin.com in the Support section. Through the OmniView
IP 5000HQ Manager, an administrator can upgrade the firmware of the
OmniView IP 5000HQ Manager and all connected KVM-over-IP devices,
making it unnecessary to upgrade each device individually.
16.3.1 Upgrading the KVM-over-IP device firmware
To upgrade the firmware version of all connected KVM-over-IP devices
or the OmniView IP 5000HQ Manager:
1. Obtain the latest firmware version from Belkin.
2. Save the file on the client computer.
3. Log in to the OmniView IP 5000HQ Manager Web interface.
4. From the “Settings/Maintenance” menu, click “Firmware Upgrade”;
Figure 99 appears.
Figure 99 Firmware upgrade
5. Press “Browse” and locate the upgrade file.
6. Press . OmniView IP 5000HQ loads the firmware and
initiates the upgrade.
When upgrading KVM-over-IP devices, the firmware uploads to five
KVM-over-IP devices at a time. KVM-over-IP device status changes to
“Uploading” and then to “Rebooting” as the firmware finishes upgrading.
The uploaded firmware is stored in the OmniView IP 5000HQ Manager.
Every new KVM-over-IP device connected to the system is automatically
upgraded to this firmware.
When upgrading the OmniView IP 5000HQ Manager, the OmniView IP
5000HQ Manager reboots automatically. Log in again.