Filter
Top Products
19
CHAPTER 4: Host Configuration
Use the arrow keys to select “Supervisor Options,” and press <Enter>:
Supervisor Options
Default Account Balance/Restrictions
Default Fine Restrictions
-> Edit System Autoexec file
File Server Console Operators
Intruder Detection/Lockout
System Login Script
View File Server Error Log
Workgroup Managers
Fig. 4-2. Supervisor Options Menu.
Select “Edit System Autoexec File” and press <Enter>. The current startup
file will be shown. Add this command line anywhere in the file:
SET ALLOW UNENCRYPTED PASSWORDS = ON
Press <Escape> to exit the editor, and use the Save Changes menu to save
the file. Press <Escape> and exit the SYSCON utility.
2. Perform the remaining steps via the PCONSOLE utility. To run
PCONSOLE, you need to be SUPERVISOR on the file server you will be
changing. Type PCONSOLE at the F: prompt to start the utility.
F: PCONSOLE<Enter>
2a. You must tell the file server what print resources are on the network.
Select “Print Server Information” from the “Available Options” menu
(see Fig. 4-3).
Available Options
Change Current File Server
Print Queue Information
-> Print Server Information
Fig. 4-3. Available Options Menu.
2b. You will be shown a list of current print servers. You need to enter the
EPS’s server name and the names of the resources on the EPS that will be
visible to the file server. After adding the EPS resources, you will see
them in this list.