2
Bosch Security Systems | 04-2003 | 3922 988 43318 en
Digital Congress Network | Installation and Operating Manual | Chapter 5 - Control using PC
en | 5-12
Software configuration Master CCU PC (OS/2) (Serial Ports 1 and 2)
Table 5-11: DCN Printer and COM-ports for systems using ‘DIRECT’ PC control (see Chapter 5.7 and Chapter 5.8)
LASE RPRINTER
LPT1 (IRQ=7)
MATRIX PRINTER
COM 1 (IRQ = 4)
CARD ENCODER/ AUX.- INTERFACE
COM 2 (IRQ=3)
CENTRAL CONTROL UNIT
COM 3 (IRQ=* (free IRQ)
SOFTWARE PACKAGE Windows® Print Manager = ASCII + CR + LF = ASCII + CR + LF
LBB 3590 Startup Error messages
Printing
Error logging
Real-time
Sent to Auxiliary
LBB 3585 System
Installation
Seat numbers
Printing
Channel assignment
Printing
LBB 3571 Synoptic Micro-
phone control
Microphone activity
List Printing
Microphone activity
Real-time Printing
Microphone activity
Real-time to Aux. (Camera ctrl.)
LBB 3570 Microphone
Management
Microphone activity
List Printing
Microphone activity
Real-time Printing
Microphone activity
Real-time to Aux. (Camera ctrl.)
LBB 3580 Delegate
Database
Database
List Printing
Label printing Chip card encoder
LBB 3575 Parliamentary
Voting
Voting file total* and individual*
Printing
(Real-time) Post-voting
total* and individual*
Printing
* Depends
on which-
mode
selected
LBB 3572 Simultaneous
Interpretation
Desk language assignment
Auto Printing
Channel language assignment
Printing
LBB 3573 Intercom
Switching
File
Printing
LBB 3578 Attendance
Registration
List Registration
Printing
File Registration
Printing
For COM and LPT cable connections, refer to FIG 5-9
LPT1 Default settings
COM 1 and COM 2
Default settings
COM 3
8- bit standard Baud-rate = 9600
Data-bits = 8
Parity = None
Flow control = None
Baud-rate = 9600
Data-bits = 8
Parity = None
Flow control = HW
* Change default COM-port assignments. (This can only be
done in the dcn.ini file located in the ‘Window®
directory)
* COM-port selected during software installation.
(Can be changed in the dcn.ini file located in the
‘Window® directory)
** Change COM-port settings: (Using the Port program
found in the Windows Control Panel. Only applicable
for Micactlogging)
* 1 Not possible
* 2 Not possible
* 3 Not possible
* 3 Not possible
* 4 Not possible
* 5 Not possible
*1 [Errorlogging]
Comport=2
*2 [MicActlogging]
Prt-port=2
*3 [MicActlogging]
Comport=1
** Baudrate - 19200
*4 [Label printing]
Comport=2
*5 [CardEncoding]
Comport=1
*5
*3
*3
*4
*2
*2
*1
