Filter
Top Products
2
Bosch Security Systems | 04-2003 | 3922 988 43318 en
Digital Congress Network | Installation and Operating Manual | Chapter 7 - DCN Installation Accessories
en | 7-4
Introduction Installation accessories
7.1.4 Connectors
The 6-pole moulded circular connectors, male and female include a plug locking facility for use with
cable locking clamps LBB 4117/00.
When connecting connectors to extension cables, it is recommended that insulated metal shield
connectors be used, rather than plastic to protect the connectors according to EMC specifications.
For connection details refer to Chapter 13.7.
7.1.5 LBB 4117/00 Set of 25 cable locking clamps
Clamps for male/female cable connectors, such as those on the extension cable LBB 4116. One
clamp per connector set male/female is required.
7.1.6 LBB 4117/00 Termination plug for DCN Cable
The LBB 4117/00 termination plug is specially designed for use with the open-ended DCN cabling. It
is connected to the output cable on the last electronic channel selector panel (LBB 3524/10, LBB
3526/10) in a daisy -chain configuration..
FIG 7-6 Termination plug LBB 4117/00