Filter
Top Products
CHAPTER 4 CONTROL PANEL
4–35
■ Card List
When you select “CARD LIST” and you press the SET switch, the printer
automatically loads paper and starts printing the contents of the installed
flash memory card or HDD card. You can check the contents and the unused
capacity of the card.
■ Save
When you select “SAVE” and you press the SET switch, you can enter the
following sub-setting menus to save the macros and fonts in the installed
card:
Display Message Save Menu
SAVE DATA Save data that the printer will receive and set
its ID.
SAVE MACRO Save a macro. This menu appears only in the
HP LaserJet 4+ emulation mode.
PRIMARY FONT Save the primary font selected with the
FONT switch. This menu appears only in the
HP LaserJet 4+ emulation mode.
SECONDARY FONT Save the secondary font selected with the
FONT switch. This menu appears only in the
HP LaserJet 4+ emulation mode.
DOWNLOAD FONT Save a download font. This menu appears
only in the HP LaserJet 4+ emulation mode
and BR-Script 2 mode.
✒ Note
If the capacity of the card becomes low while macros and fonts are being
saved, the display shows the “CARD FULL” error message and they cannot
be saved. Use a new card or delete unnecessary macros and fonts from the
card. The CARD LIST displays the contents and the used capacity.