Filter
Top Products
CHAPTER 4 CONTROL PANEL
4–67
If the function is turned on, the downloaded macros and fonts are kept in
the printer’s memory until the printer is turned off, so that they are not
cleared by switching the emulation to the BR-Script 2 mode.
✒ Note
The “KEEP PCL” function reserves free space in the printer’s memory and
may cause a memory full error. If a memory full error occurs, expand the
memory capacity or turn off this function.
10. Press the SET switch.
The “exit” message appears on the display.
11. Press the SET switch again.
The printer exits from the setting mode to the off-line state.
✒ Note
When you use the automatic emulation selection, try it with your
application software or network server. If the function does not work
properly, select a particular emulation mode manually. You can use the
following commands to select the emulation on the network.
Commands Hex Emulation
ESC CR H 1B 0D 48 HP LaserJet 4+
ESC CR AB 1B 0D 41 42 BR-Script 2
ESC CR GL 1B 0D 47 4C HP-GL
ESC CR E 1B 0D 45 EPSON FX-850
ESC CR I 1B 0D 49 IBM Proprinter XL
About Emulation Modes
This printer has the following emulation modes:
■ HP LaserJet 4+ Mode
The HP LaserJet 4+ mode (or HP mode) is the emulation mode where this
printer emulates the Hewlett-Packard LaserJet 4+ laser printer. Since a
large number of application software packages support this type of laser
printer, your printer will operate at its optimum performance in this mode.