Filter
Top Products
USER’S GUIDE
4–22
✒ Note on “AUTO MASK”
When you use application software in non-HP modes, be sure to set “AUTO
MASK” to ON. When you use letter- or A4-size paper, the top and bottom 2
lines are masked and they do not appear on the printout.
The auto modes are subject to the current emulation mode.
O : The auto modes can be set.
X : The auto modes cannot be changed and no setting appears.
— : The auto modes are not available.
Printer Emulation (Factory settings in bold print)
AUTO Mode HP
LaserJet 4+
EPSON
FX-850
IBM
Proprinter XL
AUTO LF
O OFF O OFF O OFF
AUTO CR
O OFF X ON O OFF (Note)
AUTO WRAP
O OFF X ON X ON
AUTO SKIP
O ON
——
AUTO MASK
—
O OFF O OFF
✒ Note
In the IBM emulation mode, FF codes are always followed by a CR code.
PAGE FORMAT MODE
✒ Notes
The settings in this mode menu vary as follows:
• All settings are effective in the HP LaserJet4+, EPSON FX-850, and
IBM Proprinter XL modes.
• The X and Y (vertical and horizontal) offsets are effective in the BR-
Script 2 mode. Other settings are not effective and they do not appear in
this mode.
• The paper size and the X and Y (vertical and horizontal) offsets are
effective in the HP-GL mode. Other settings are not effective and they
do not appear in this mode.