Filter
Top Products
TROUBLESHOOTING AND ROUTINE MAINTENANCE 12 - 11
3
Take the used ribbon out of the cartridge:
1
Snap out the upper white spool and slide the roll off the blue gear. (Do not
remove the blue gear)
2 Lift out the lower roll.
4
Slide the white elastic off the new refill rolls and set them down with the full roll
in the lower position. (The ribbon’s shiny side is facing down.)
5
Remove the white gear and spools from the ends of the used cardboard cores.
Then insert them into the same positions in the new cores.
Blue
Gear
Used Ribbon
Upper White Spool
Cartridge
Lower White Spool
White Gear
White Gear
White Spool