Filter
Top Products
4 - 4 INITIAL SETUP
Setting the Speaker Volume
You can adjust the speaker volume. Press
Hook
before you can adjust the volume,
then press or to adjust the volume level. The display shows the
setting you are choosing. Each key press changes the volume to the next setting.
The new setting will remain until you change it again.
Choosing the Handset Volume (For Volume Amplify)
Before you begin to use your machine, you must decide if you need to set the
handset volume to
VOL AMPLIFY:
ON?
for a user who is hearing-impaired. The
AMPLIFY volume level complies with FCC standards.
VOLUME AMPLIFY: OFF
This default setting is appropriate if none of the users are hearing-impaired. During
a conversation, users can press or on the control panel to adjust the
volume to
LOW
or
HIGH
. When the handset is replaced, the handset volume will
remain until you change it again.
VOLUME AMPLIFY: ON–TEMPORARY
This setting is appropriate if some of the users are hearing-impaired. During a
conversation, users can press or on the control panel to adjust the
volume to
LOW
,
HIGH
or
AMPLIFY
. When the handset is replaced, the handset
volume returns to the default setting of
LOW
.
VOLUME AMPLIFY:ON–PERMANENT
Choose
VOL AMPLIFY:
ON?
–
PERMANENT?
if all of the users are hearing-impaired.
During a conversation, users can press or on the control panel to
adjust the volume to
LOW
,
HIGH
or
AMPLIFY
. When the handset is replaced, the
handset volume returns to the default setting of
AMPLIFY
.
When you press or on the control panel to adjust the volume,
the LCD shows the setting you are choosing. Each key press changes the
volume to the next setting.
It is important that you do not choose
PERMANENT
unless all users are
hearing-impaired. Otherwise, the default setting of
AMPLIFY
may damage
the hearing of some users.