Filter
Top Products
MAKING COPIES 10 - 2
Copy options: Single or Multiple copies, Sort/Stack,
Reduce/Enlarge
You can choose additional copy options. First, you can select the number of copies.
Next, you can choose whether multiple copies will be
STACKED
(all copies of page
1, then all copies of page 2, etc.) or
SORTED
(collated). Finally, you can choose an
enlargement or reduction ratio. To automatically reduce the copy to the paper size you
have set for the paper tray, select
AUTO
. To reduce the copy by a fixed percentage,
choose
93%
,
87%
,
75%
or
50%
. Or, to enlarge the copy, select
150%
,
125%
or
120%
.
To copy a document at its original size, select
100%
.
1
Insert the original face down in the ADF.
2
Press
Copy/Reports
.
3
Enter the number of copies you want (1-99).
To start copying now, press
Copy/Reports
.
If you would like to select additional copy options, like
SORT
,
ELG/RDC
(Enlarge or Reduce) press
Menu/Set
.
4
Press or to select
SORT
or
STACK
.
To start copying now without enlarging or reducing, press
Copy/Reports
.
To reduce or enlarge the image, press
Menu/Set
.
5
Press or to select an enlargement
or reduction ratio.
6
Press
Copy/Reports
.
If you are making multiple copies and get a
OUT OF MEMORY
message while
you are scanning the first page, press
Stop/Exit
to cancel the job. Then make
a single copy. If you selected
SORT
and the
OUT OF MEMORY
message
appears while scanning subsequent pages, you can press
Copy/Reports
to
copy the portion that is in memory, or press
Stop/Exit
to cancel. To restart
the copy job using less memory, press
Copy/Reports
for stacked copies.
The default resolution for multiple copies or reducing and enlarging copies is
FINE
. Set the resolution to
S.FINE
for small print or artwork and
PHOTO
for
photographs by using the
Resolution
key.
S.FINE
and
PHOTO
resolutions
use up more memory than
FINE
mode.
NO.OF COPIES:01
THEN COPY OR SET
ELG/RDC:100%?
SELECT
↑
↓
& SET