Filter
Top Products
REMOTE FAX OPTIONS 8 - 3
Setting your remote access code
The remote access code lets you access the Remote Retrieval features when you
are away from the fax machine. Before you use the remote access and retrieval
features, you have to set up your own code. The default code is inactive code (--- ).
1
Press
Menu/Set
,
8
,
3
.
2
Enter a three-digit number from
000 to 999.
Press
Menu/Set
. (The “ ” cannot be changed.)
3
Press
Stop/Exit
.
Remote Retrieval
You can call the fax machine from any telephone or fax machine using touch tone,
then use the Remote Access Code and remote commands to retrieve fax messages.
Cut out the Remote Retrieval Access Card on the last page and keep it in your wallet
to help you.
Using your remote access code
1
Dial the fax number from a telephone or another fax machine using touch tone.
2
When the fax machine answers, immediately enter your Remote Access Code
(3 digits followed by ).
3
The fax machine signals if it has received fax messages:
1 long beep
— Fax messages
No beeps
— No fax messages
4
The fax machine gives two short beeps, which tells you to enter a command.
The fax machine will hang up if you wait longer than 30 seconds to enter a
command. The fax machine will beep three times, if you enter an invalid
command.
5
Press
90
to reset the fax machine when you’ve finished.
6
Hang up.
Do not use the same digits that appear in your Fax Receive Code( 51) or
Telephone Answer Code (
#
51). (See Operation from extension telephones on
page 5-5.)
You can change your code at any time by entering a new one. If you want to
make your code inactive, press
Stop/Exit
in Step 2 to restore the inactive
setting (--- ).
If the fax machine is set to
MANUAL
mode and you want to use the remote
retrieval features, you can access the fax machine by waiting about 2 minutes
after it starts ringing, and then entering the Remote Access Code within 30
seconds.
3.REMOTE ACCESS