Filter
Top Products
4. Network Scanning (For models with built-in network support)
84
Scan to FTP 4
When you choose Scan to FTP, you can scan a black and white or colour document directly to an FTP server
located locally on your network or on the internet.
The details required to use Scan to FTP can be entered manually at the control panel or by using Web Based
Management to pre-configure and store the details in an FTP Profile.
For information on how to manually enter the Scan to FTP details, see Scan to FTP Manual Method on page
86. To use Web Based Management, type http://xxx.xxx.xxx.xxx (where xxx.xxx.xxx.xxx is the ip address
of your machine.) into your browser, and then you can configure or change the settings in the Administrator
Settings. You can configure up to ten FTP server profiles.
a Enter the name that you want to use for the profile of the FTP server. This name will be displayed on the
LCD of the machine and can be up to 15 characters.
b The Host Address is the domain name of the FTP server. Enter the Host Address (for example
ftp.example.com) (up to 60 characters) or the IP address (for example 192.23.56.189).
c Enter the Username that has been registered with the FTP server for the MFC (up to 32 characters).